Learning how to color my own brows has been The most beneficial beauty skill I’ve ever acquired

Learning how to color my own brows has been The most beneficial beauty skill I've ever acquired

My brows are a light golden color. In addition, I have little interest in filling them out on a daily basis. Despite this, I do. It’s not the best situation. However, with a little dye, all of it is transformed. Yes, I’m referring about eyebrow tinting done at home. With a few simple materials and a little know-how, all of the tiny baby hairs that are ordinarily unnoticeable begin to fill up, and my brows begin to take on a more defined form. In a matter of minutes, my whole scenario has changed, and I no longer have to meticulously pencil in my brows using delicate “hair-like” strokes to get the desired effect.

When done in a salon, eyebrow tinting costs around $15 for approximately two minutes of labor. This isn’t a significant time or financial commitment (particularly when compared to the lengthy list of other salon treatments I like), but it still seems superfluous to me. Contrary to this, you can learn how to color your brows the DIY approach, just as I did, and you’ll save a few dollars and a couple of visits to the salon in the process.

Changing the color of your eyebrows can have a significant impact on your overall appearance: contrasting brows can give you a bold, mysterious air, darker brows can make you appear fuller and thicker, and brows that are similar to your hair color can give you a natural and balanced appearance, among other things. However, although coloring your brows is a very straightforward operation, applying dye on the delicate skin surrounding your eyes, and especially so near to your eyes, may be potentially hazardous. Make certain that you follow all directions to the letter and, if in doubt, seek expert assistance.


While I like using a decent brow product, I found eyebrow tinting a few years ago, which is the ultimate in semi-permanent beauty: eyebrow tinting. It creates the illusion of thicker, darker, and more powerful arches almost instantaneously by coloring both the hairs and the skin behind the brows at the same time. Plus,

I appreciate that I no longer have to deal with the Sisyphean effort of filling in my brows in between dye sessions. I started to obediently book appointments every two or three weeks with my local brow specialist and made my way to her office.

Now, maybe it’s the former financial journalist in me, but after spending more than $25 having my eyebrows colored at upscale salons only to have the color fade within two weeks, I realized I needed a greater value proposition in order to justify continuing to invest my time and money in the service.

As a result, I decided to take matters into my own hands, figuratively speaking. A friend of mine, who has really stunning brows, once told me that she does her own eyebrow tinting at home rather than making appointments with a professional. When you consider that a box of dye costs approximately $10 and may be used for up to seven or eight applications, it looked like a worthwhile experiment.

And what if you don’t like it or it’s just too dark, too much, or whatever? It fades in about a week and a half, at the most.

I’m grateful to my buddy for the advice since I’ve now been doing it on a regular basis and have discovered that doing my own eyebrow tinting every couple of weeks is far more convenient, efficient, and cost-effective than going to a salon.

In addition, there is no time spent travelling to and from a salon, and I can color my brows at 1 a.m. on a Friday night while listening to podcasts and brushing my teeth, which is something I’ve been known to do in the past.

Do you want to experiment with brow tinting at home? It just takes 5 to 10 minutes to do this task. The Just for Men Brush-In Color Gel for Mustache and Beard is a must-have for this project; it comes with dye, developer, a brush, gloves, and a little tray. You’ll also need a timer, petroleum jelly, cotton swabs, mild shampoo, and the Just for Men Brush-In Color Gel for Mustache and Beard. Follow along with me as I go through my regimen.

Choosing the Appropriate Dye

1 – Avoid using permanent hair color if at all possible. The color that is intended for use on your head is going to be much too harsh on the skin around your eyes since it is created for scalp usage.

You might burn the delicate skin around your eyes or even singe your brows off if you do this. The ingestion of hair color may be very harmful to your eyes if it gets into them.

  • Consider other options such as beard dyes, semi-permanent hair dyes, or demi-permanent eyebrow dyes.
  • Beard dyes are often available in a broad range of neutral tones and are specifically developed to color fine hairs, such as those in your brows.

2 – Make your brows look larger by going a shade darker to give them more definition.Making your brows seem thicker and fuller by darkening your hair can help to enhance the contour of your brows and may make them appear thicker and fuller—perfect for anybody who has thin or extremely light brows. If you want to add a little more drama to your appearance, you might consider coloring your brows two shades darker.

Keep your brows from becoming considerably darker than your natural shade; otherwise, your brows will seem inky and false, and your natural roots will be visible as new hair grows in.

Some beauty experts recommend that you strive to match the color of your eyebrows to the color of the darkest hairs on the top of your head.

3 – In the case of going from dark to blonde hair, lighten your eyebrows by one or two shades. If you’ve just dyed your hair a completely different color, your black brows may seem a touch harsh. If your brows are naturally black, you might try dying them a dark brown color. Again, try not to go too far from your natural shade so that your roots do not seem out of place as they begin to develop.

If you’ve dyed your hair red, you may enhance the color of your eyebrows by adding some warmth to them to match your hair color. For example, you may move from dark brown to mahogany.

Honey is a natural lightening substance that may be used to get a lighter complexion. Apply a mixture of a few teaspoons of honey and a cup of vinegar or hydrogen peroxide to your brows and leave on for 30 minutes before washing off.

You’re Getting Ready to Dye Your Eyebrows

1 – Be aware of the dangers. For usage on your eyebrows or eyelashes, no dye—not even those advertised as eyebrow dye—has been authorized by the FDA for use. You may get an allergic reaction or damage to the delicate skin surrounding your eye. If the dyes go into your eyes, they may cause discomfort and, if they penetrate into your eyes, they can cause blindness.

If you opt to color your eyebrows, use extreme caution to avoid getting any color in your eyes. Make sure to apply the dye in little quantities to reduce the likelihood of it dripping off the applicator and into your eye.

Keep two bottles of sterile eye irrigation solution on available in case you accidentally get any dye in your eye and need to flush it out. Irrigate your eye with the full bottle, and if the burning persists, use the entire second bottle to relieve the irritation.

Make careful to test the dye on a small patch of skin first (the back of your neck or the inside of your upper arm will work). After the procedure, if your skin doesn’t respond in the two days that follow, you may color your brows without worrying about a response.

2 – Wash your face with a gentle facial cleanser or soap. 3 – It is important to apply eyebrow color on a clean surface. Use a gentle scrape to remove grease and grime from your brows. If your skin or brows are greasy, the dye may not perform as effectively as it should.

Learning how to color my own brows has been The most beneficial beauty skill I've ever acquired
Learning how to color my own brows has been The most beneficial beauty skill I’ve ever acquired

Pulling your hair back and away from your face with a headband or bobby pins can keep it out of your eyes and away from your face.

It’s important to take off all of your makeup as well so that you can notice the color shift in its entirety.

3 – Apply a sufficient quantity of petroleum jelly to the brows to define them. Spread petroleum jelly or a thick conditioner on the skin surrounding your brows with a cotton swab (but be careful not to get any on your eyebrows themselves). This will function as a barrier to prevent color from getting into the skin around your brow and will also assist to keep the color out of your eyes. It may also help to alleviate skin inflammation.

4 – Prepare the eyebrow dye according to the package recommendations. The directions for mixing differ depending on the type of product that is bought, but the end result is the same. Use a thick paste-like consistency when applying the dye to eyebrows or beards to get the desired results.

If the color is runny or watery, this indicates that it has not been properly blended. The pasty composition prevents the color from dripping over your brows and into your eyes.

If the dye is made up of two tubes of substance that you mix together, use just approximately a pea-sized quantity of each tube for each color. The amount of color you’ll need is little, and you may preserve the remainder for touch-ups later on.

The dye solution should be prepared the day before it is to be used.

Making Your Eyebrows Look Different

1 – Apply the eyebrow dye to your brows by spreading a thick coating throughout them. Although eyebrow dye kits include an applicator, you may alternatively use a cotton swab or a clean spoolie wand to apply the color. Work your way outwards from the inside half of your eyebrow (the part closest to your nose) toward the thinner end of the brow to get the best results.

It’s important to push the dye into the roots of your eyebrows and to ensure that the color covers the whole eyebrow.

After you’ve finished with one brow, go on to the second brow. Make certain that you are just applying the color on your brows.

Make every effort not to get it on your skin since it will stain your skin for a period of time. However, if you do get any color on your skin, apply moisturizer or petroleum jelly into the stain and wipe it away with a paper towel as soon as possible.

2 – After 3-5 minutes, use a pointed cotton swab to wipe out any color that has gotten into the fabric. While most brands recommend dying for 10-15 minutes, dyeing in fewer minute increments allows you to have more control over the final color.

If you have thick, black brows, work in 5-minute intervals to avoid damaging them. Stick to three-minute intervals if you want thin, light brows.

To remove any cream that has ended up on your skin rather than your hair, or to clean up spots where it looks to be coloring your skin, soak a cotton swab in warm water and wipe it over the affected region. If warm water does not remove the stain, a little amount of face tonic might be used to remove it.

To remove the color off your eyebrows, use a dry cotton pad to wipe them off. Close your eyes to prevent any dye from going into them.

Examine the color of your brows by smoothing them out. If the dye does not take, continue the dyeing procedure for another 3-5 minutes until the dye does take.

It is not recommended to use the color more than two or three times since it may dry out or harm your skin. If you want to acquire a deeper color in your brows, you should wait 48 hours before dyeing them again.

When you’ve achieved the correct shade, remove the dye with a dry cotton pad to reveal the original color.

Then, using a cotton pad soaked in color stain remover, go over your brows to stop the coloring process from continuing.
Warm water should be used to rinse or wipe your brow.

4 – Examine your brows in the mirror to check if any locations were missed throughout the application process. You may wish to use a magnifying mirror to ensure that your brows are plainly seen. Spot-treat any areas that may have escaped your notice with a cotton swab soaked in color.

5 – Shape your brows with tweezers or wax to get the desired look. Using tweezers before dyeing your eyebrows is not recommended since it might cause discomfort and infection in those areas.

6 – Don’t be concerned if the hue isn’t precisely what you were hoping for. After a week, eyebrow dye normally starts to fade, and the color will no longer be as vivid.. If you can’t wait a week, use a clean toothbrush or spoolie to run a drop of clarifying shampoo through your brows to remove any residue.

Allow it to rest for 60 seconds before rinsing your brows thoroughly. The clarifying shampoo will remove the oils from your brows as well as part of the color from them.

If you discover that you have dye on your skin behind your brows, dab a cotton pad with an oil- or silicone-based makeup remover and gently wipe your brows down. If there is dye on your skin, it should show up on the cotton pad, and your brows should be around one shade lighter after they have dried.

You may also produce a paste by mixing baking soda with your regular shampoo in a one-to-one ratio. Brush on this product to your brows and allow it to remain for few minutes before brushing it off. If you do this many times, the color of your brows should become less intense.

How to Keep Your Homemade Brow Tint Looking Great

It will be OK to wear your stunning colored brows for another couple of weeks after that. Marinescu suggests putting castor oil to the brows at night to keep them moisturized in between dying sessions, according to her. (Charlize Theron is certain about it.) What about the rest of your brow grooming routine? You have complete freedom to shape your brows as usual.

Other Excellent Brow-Tint Products to Consider

This selection of semi permanent moustache dyes can last anywhere from a few days (Maybelline and Wunderbrow) to a few weeks (Eylure and Ardell), making them excellent beginner alternatives if you’re worried about getting the color just right.

Tags: self-care

Related Posts

30 Amazing Benefits and uses for Vaseline - Petroleum Jelly Submissive Dog Behaviors to Be Aware Of

Leave a Reply

Your email address will not be published.